Characteristic |
Details |
| Machine |
RG9 |
- Machine type
- Dimensions - main machine (w x d h)
- Total machine weight |
CNC Grinding machine for PCD, PcBN
1,520 x 1,270 x 1,980mm
1,140kg |
| Vision System |
- Vision system type
- Optical axes
- Optical axes adjustment
|
VS4
X, Y & Z all CNC controlled
X&Y = 30mm; Z (focus)=40mm |
| Wheel spindle |
- CNC controlled
- Spindle type
- Wheel spindle power
- Speed range |
Yes
Coborn precision, dynamically balanced
2.2kW
0 - 4,000 rom (available) |
| Wheel in-feed |
- CNC controlled
- In-feed travel available
- In-feed travel resolution
- Typical roughing in-feed rate on PCD
- Typical finished in-feed rate on PCD |
Yes
45mm
1um (via Renishaw encoder)
12 - 15 um/sec
3 - 5 um/sec |
| Wheel stroke |
- CNC controlled
- Wheel stroke frequency |
Yes
0-100 Hz (typically used at 25Hz) |
| Wheel stroke position |
- CNC controlled
- Wheel stroke position adjustment |
Yes
1um (repeatability 10um) |
| Work table - "boom" |
- CNC controlled
- Inclination (for conical clearance) |
Yes
0 - 25 degrees |
| Cross slide |
- CNC controlled
- Clamping surface size
- Cross table travel range
- Cross table position resolution |
Yes
310 x 180mm
40mm
1um (via Renishaw encoder) |
| Pivot |
- Pivot movement
- Pivot position adjustment |
200 degrees
± 3 seconds of arc (readout to 0.001 degrees) |
| Tool post |
- Toll post hand
- Toll nest format |
right hand fitted as standard
Square fitted as standard |
| |
Characteristic |
Details |
| Grinding wheels |
- Wheel bond type recommended
- Format
- Wheel grit size for roughing PCD
- Wheel grift size for finishing PCD
- Wheel arbour
|
Vitrified :KILO" bond
Usually 6A2
Typically D25 - D35
Typically D5 - D10
Required allows rapid wheel changes |
| Dressing |
| - Rotary dressing unit |
Fitted as standard |
| Lubrication |
| - Centralised lubrication |
Fitted as standard |
| Coolant Unit |
- Coolant unit dimensions (w x d x h)
- Coolant unit weight
- Coolant pump power
- Coolant tank capacity
- Coolant pump flow rate |
1,150 x 500 x 670mm
118kg
0.12kW
100 litres
50 l/min |
| Electrical Requirements |
3 pahse, 415v or 220v |
| |
| Optional extras - not a complete listing |
| Rotary axis - RM100 |
|
- CNC controlled
- Face plate
- Maximum cutter diameter with LM50 fitted
- Maximum cutter length
|
Yes - for HSK, ISO, MK, Hydraulic chucks etc
Yes - for HSK, ISO, MK, Hydraulic chucks etc
150mm
150mm from front spindle |
| Linear axis - LM50 |
Yes - further information available |
- CNC controlled
|
Yes |
